Virnig TDM60

Double tap to zoom

TDM60

Efficiently mulch 6-8” diameter trees and quickly cut up to 14” diameter trees.

BENT-AXIS PISTON MOTOR WITH RELIEF VALVES
STANDARD MOTOR GUARD & SPINDLE GUARD
60″ FULLY-MACHINED PERFECTLY BALANCED QUADCO® DISC
BOLT-ON STEEL TOOTH MOUNTS WITH FOUR-SIDED ROTATABLE & REPLACEABLE TEETH (CARBIDE TEETH AVAILABLE)
3 DECK MOUNTED TEETH & RECUTTER BAR FOR A FINER FINISH
3/8″ GRADE 80 INTERIOR DECK WELDMENT
REPLACEABLE PUSH BAR, CHUTE & DEFLECTOR
TWO CHUTE STYLES Choose from two chute styles; standard or open. See options tab for details.

MODEL	TDM60
Cut Width (Inches)	60.0
Overall Width (Inches)	70.0
Overall Height (Inches)	40.5
Overall Depth (Inches)	77.5
Deck Height (Inches)	11.0
Push Bar Height (Inches)	40.5
Minimum Cut Height (Inches)	2.1
Cutting Capacity, Diameter (Inches)	14
Number of Teeth: Top / Bottom / Outside	12 / 20 / 12
Maximum Disc Thickness (Inches)	1.25
Deck Thickness: Top, Side / Inside (Inches)	0.25 / 0.375¹
Recommended Flow Rate (GPM)	30-45 High Flow Only
Approximate Weight (Pounds)	2710
Recommended Loader Capacity	Greater than 2800 pounds

*Inside Deck Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength).

DISC TIP SPEEDS (FPM)
Requires a High Flow Loader with a Flow Rate of 30-50 GPM.
Max Operating Pressure is 4,200 PSI