Windstar Equipment and Auctions, TX

  • Contact

31155 Bunting Road
Waller, TX 77484

Directions
BROWSE ALL EQUIPMENT

Virnig XBC48

Equipment Lines / Virnig Equipment / Brushcutters / X30 Mini Excavator Rotary Brush Cutter / XBC48

Double tap to zoom

XBC48

X30 Mini Excavator Rotary Brush Cutter

Cut up to 4″ diameter trees and access hard to reach areas for a maintained finish.

 

Features

  • NO CASE DRAIN REQUIRED. DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVE PROTECTION
  • UNIQUE BOLT-ON FRONT DECK. REMOVE FOR 270-DEGREE BLADE ENGAGEMENT
  • BOLT-ON MOUNTING INTERFACE FOR QUICKLY CHANGING HANGER BRACKETS
  • ROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
  • SERRATED REAR DECK FOR BACK DRAGGING BRUSH & GRUBBING STUMPS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • VARIOUS HANGER BRACKETS AVAILABLE TO FIT MOST EXCAVATOR BRANDS

 

NOTE: Hanger bracket not included.

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

Specifications

MODELXBC48
Cut Width (Inches)48.0
Overall Width Without Sides / With Sides (Inches)44.9 / 58.0
Overall Height (Inches)21.5
Overall Depth (Inches)58.5
Deck Height (Inches)5.8
Minimum Cut Height with Bolt-On Front (Inches)2.0
Cutting Capacity, Diameter (Inches)4.0
Deck Thickness: Top/Side (Inches)0.25¹
Recommended Flow Rate (GPM)15-22 / 22-28 / 28-35 / 35-38
Approximate Weight Without Sides / With Sides (Pounds)815' / 965'
Recommended Mini-Excavator Lift Capacity Over Side at Max Reach
Greater than 815 pounds²
Recommended Mini-Excavator Weight (Pounds)11000-26000
Number of Teeth (Optional)18

¹Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
²Greater than 765 pounds with one side curtain and 830 pounds with both side curtains.

BLADE TIP SPEEDS (FPM)

STANDARD FLOW MODEL 

MODELXBC42-25XBC42-28XBC48-22XBC48-28
15 GPM9,525-10,885-
22 GPM13,9709,01015,96510,300
25 GPM15,87510,240-11,705
28 GPM-11,470-13,110

 

MODELXBC48-35
28 GPM Minimum10,290
35 GPM Maximum12,860

 

MODELXBC48-38
35 GPM Minimum10,265
38 GPM Maximum11,143

Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM).

Only Windstar Equipment carries such a wide selection of attachments!

See For Yourself